PENETRON develops and manufactures high quality products for a wide range of waterproofing applications.
PENETRON ADMIX SB
DESCRIPTION PENETRON ADMIX® SB (Soluble Bag integral crystalline)
Crystalline Waterproofing Coating DESCRIPTION PENETRON®
Crystalline Waterproofing Dry Shake DESCRIPTION PENETRON PLUS®
DESCRIPTION PENEPLUG® is a rapid setting, integral crystalline cementitious
DESCRIPTION PENECRETE MORTAR™ consists of Portland cement
PENEBAR SW-45 rapid™
Rapid Expansion Waterstop DESCRIPTION Penebar SW-45 Rapid
Controlled Expansion Waterstop DESCRIPTION Penebar SW-55
DESCRIPTION Waterplug sets quickly while bonding to the surface
Spray-on Liquid Sealer DESCRIPTION Peneseal Pro, when sprayed onto a
Reactive Penetrating Concrete and Masonry Sealer DESCRIPTION
Polymer Modified Waterproofing Coating DESCRIPTION BLOCKSEAL
DESCRIPTION Penetron CR-90 applications are a cost effective durable
PENETRON V/O PATCH™
DESCRIPTION PENETRON V/O PATCH offers excellent adhesion and high build
INDUSTRIAL TOPPING SL
DESCRIPTION PENETRON INDUSTRIAL TOPPING SL is a single component
PREMIUM UNDERLAYMENT SL
DESCRIPTION PENETRON PREMIUM UNDERLAYMENT SL
Unlike a coating or membrane solution, PENETRON becomes an integral part of the concrete. PENETRON enhances durability by reducing permeability of the concrete, preventing water and other corrosives agents from penetrating.
Up to 1 meter; seals capillary tracts and cracks in concrete up to 400 microns in width.
Becomes an integral part of the concrete and reduces permeability; waterproofing, chemical resistance and other enhanced concrete properties remain intact even after surface damage.
Once the concrete is treated, the PENETRON crystals remain active and part of the concrete for life.
Greatly reduces permeability, allowing concrete to resist chemical attack and provides a wide range of protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates.
Does not come apart at the seams, tear or puncture; increases compressive strength of concrete.
More effective and less costly than membranes, clay panels, pore blockers, and coatings.
Does not require protection during backfilling, placement of steel or wire mesh or other common procedures; can be applied to moist or green concrete.
Can be applied to either new or existing concrete as a coating (from the positive or negative side), as a dry-shake to horizontal surfaces or as an admixture at the time of batching.
Nontoxic, NSF61, EU and EPA-approved for potable water use.
Experience & Support:
Sold through a trained and authorized network of distributors around the globe.